HMPS RSC Case Packer

HMPS - RSC Case Packer

Supplier: HMPS

RSC Case Packer

1/5

The HMPS RSC Case Packer erects, loads and seals regular slotted containers at up to 25 cases per minute, with robotic pick-and-place and top, side or end loading configurations.

Up to 25 cases per minute

Features

Erects regular slotted containers from flat pre-glued blanks, loads product and seals cases in one integrated machine.
Draws blanks from a magazine, erects cases, folds and seals bottom flaps, and indexes cases while the collation system forms the required product configuration.
Robotic pick-and-place places rather than drops product, accommodating fragile, flexible and shingled presentations.
Repeats loading cycles for multi-layer cases, with layer pads or slip sheets between layers, before folding, sealing and compressing top flaps.
Top, side and end loading configurations; loading orientation is a design choice.
Supports existing carton supplies, with double-wall or export board available.
Hot melt or tape sealing, top and bottom.
Robust engineering and Australian made.

Specifications

Specification	Standard
Typical output	Up to 25 cases/min
Case size range	Around 100 × 60 × 60 mm minimum to 1,000 × 600 × 500 mm maximum
Board	E, B and C flute including recycled content, to AS3537; double-wall and export board built to order
Loading	Top, side and end load; robotic pick-and-place, ABB standard, built to your site robot standard
Sealing	Hot melt (Nordson) standard, or adhesive tape top and bottom
Magazine	Around 150 cases on a standard erector, extendable to your required run time
Changeover	Recipe-driven from the HMI, with tool-less change parts and robot end-of-arm tooling swap
Construction	304 stainless wipe-down frame, anodised aluminium chassis, nickel-plated chain, UHMWPE tracks, no continuous lubrication
Controls	Allen Bradley CompactLogix / ControlLogix, PanelView, PowerFlex 525, SEW Eurodrive, IFM sensors
Power / air	415V AC 3-phase 50Hz + N + E, 32A · 6 bar, 350 L/min, 3 micron, 5°C dew point
Safety & standards	Category 3 minimum · AS4024.1 guarding · AS3000 wiring · light curtain with documented bypass procedure

All stats are subject to product and environment and may differ from those listed.

Applications

Flexible packs: pouches and doypacks, retort pouches, chub packs, chip and vegetable chip bags.
Tubs, jars and bottles: dip pots, honey tubs, jars, bottles and cosmetics.
Cartons and dry foods: inner cartons, bag-in-box, muesli bar cartons, single-serve cereal, noodles, biscuits and cakes.
Chilled and specialty: bags of cheese, poultry products and pasta.

Features

Erects regular slotted containers from flat pre-glued blanks, loads product and seals cases in one integrated machine.
Draws blanks from a magazine, erects cases, folds and seals bottom flaps, and indexes cases while the collation system forms the required product configuration.
Robotic pick-and-place places rather than drops product, accommodating fragile, flexible and shingled presentations.
Repeats loading cycles for multi-layer cases, with layer pads or slip sheets between layers, before folding, sealing and compressing top flaps.
Top, side and end loading configurations; loading orientation is a design choice.
Supports existing carton supplies, with double-wall or export board available.
Hot melt or tape sealing, top and bottom.
Robust engineering and Australian made.

Specifications

Specification	Standard
Typical output	Up to 25 cases/min
Case size range	Around 100 × 60 × 60 mm minimum to 1,000 × 600 × 500 mm maximum
Board	E, B and C flute including recycled content, to AS3537; double-wall and export board built to order
Loading	Top, side and end load; robotic pick-and-place, ABB standard, built to your site robot standard
Sealing	Hot melt (Nordson) standard, or adhesive tape top and bottom
Magazine	Around 150 cases on a standard erector, extendable to your required run time
Changeover	Recipe-driven from the HMI, with tool-less change parts and robot end-of-arm tooling swap
Construction	304 stainless wipe-down frame, anodised aluminium chassis, nickel-plated chain, UHMWPE tracks, no continuous lubrication
Controls	Allen Bradley CompactLogix / ControlLogix, PanelView, PowerFlex 525, SEW Eurodrive, IFM sensors
Power / air	415V AC 3-phase 50Hz + N + E, 32A · 6 bar, 350 L/min, 3 micron, 5°C dew point
Safety & standards	Category 3 minimum · AS4024.1 guarding · AS3000 wiring · light curtain with documented bypass procedure

All stats are subject to product and environment and may differ from those listed.

Applications

Flexible packs: pouches and doypacks, retort pouches, chub packs, chip and vegetable chip bags.
Tubs, jars and bottles: dip pots, honey tubs, jars, bottles and cosmetics.
Cartons and dry foods: inner cartons, bag-in-box, muesli bar cartons, single-serve cereal, noodles, biscuits and cakes.
Chilled and specialty: bags of cheese, poultry products and pasta.

Read less...

To contact HMPS about HMPS RSC Case Packer use Get a quote.

Let HMPS provide you with a quote

Supplier

Supplier: HMPS

Distribution: Australia & New Zealand

Location: ADELAIDE AIRPORT, SA

Customers: Asahi, Bega, BWX, Mondelez, Ingham, McCain, Mars, Linfox, Unilever, Coles, Fonterra, Heinz

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. HMPS are also proudly displaying these credentials:

Established:

1980

Employees:

51-200

Customers:

Asahi, Bega, BWX, Mondelez, Ingham, McCain, Mars, Linfox, Unilever, Coles, Fonterra, Heinz

Distribution:

Australia & New Zealand

Location:

ADELAIDE AIRPORT , SA

Joined:

Nov 2026