Senator CM Series Rotary Screw Air Compressor ...

Senator - CM Series Rotary Screw Air Compressor

Supplier: Glenco Air & Power

CM Series Rotary Screw Air Compressor

1/6

Senator CM Series 4-in-1 rotary screw air stations combine a compressor, air receiver, refrigerant dryer and pre- and post-filters, with 7.5 to 22 kW permanent magnet variable speed motors.

4-in-1 compressed air stations

Features

Integrated, ready-to-run compressed air station supplies clean, dry compressed air with low installation cost and floor-space requirements.
Compact European design concepts and heavy-duty components suit Australia’s harsh operating conditions.
Soundproofed cabinet and anti-vibration mounting allow installation directly at the work site.
Precision rotary screw air-end with advanced rotor profile and slow rotor speed provides 24/7 reliability, high flow, low energy consumption and long service life.
Permanent magnet variable speed motor offers higher efficiency across a wider operating range than conventional induction motors. Direct drive eliminates belt-transmission losses.
Microprocessor-based VSD optimises motor speed and power to match air demand, reducing consumption, operating costs and unnecessary load/unload cycling.
Electronically adjustable 8 or 10 bar pressure settings require no mechanical modification.
Quieter operation, reduced vibration, improved reliability and lower maintenance requirements.
Largest-in-class air receiver reduces pressure fluctuations and improves condensate removal.
Multi-function electronic controller with LED display supports operation, monitoring, protection, maintenance scheduling, sequential control and remote start/stop.
Refrigerant dryer occupies a thermally segregated compartment for continuous moisture removal.
Pre- and post-filters with element condition gauges remove particulates down to 0.01 micron and limit oil carry-over to 0.01 ppm.
Timer drain valves share a single connection for automatic, clean and safe condensate disposal from the receiver, dryer and filters.
Lift-off cabinet panels, air-treatment access panels, spin-on oil filter and air/oil separator elements simplify maintenance and minimise downtime.
Equipment includes cooling fan, dryer cooling fan, condenser, oil cooler and air after-cooler, oil level gauge, electrical cabinet, pressure controller, dryer control button, dryer fault indicator and emergency stop button.
Compliant with Australian Workplace Health and Safety Regulations for industrial workplace use.
Each compressor undergoes a 100-point pre-delivery inspection and full-load testing in Australia.

Specifications

Parameter	Unit	CM8	CM11	CM15	CM18	CM22
Free Air Delivery * # @ 8 bar	m3/min	0.47-1.10	0.95-1.78	1.29-2.45	1.51-2.85	1.95-3.68
Free Air Delivery * # @ 116 psi	cfm	16-39	33-63	45-87	53-101	69-130
Free Air Delivery * # @ 10 bar	m3/min	0.44-0.88	0.92-1.53	1.28-2.14	1.45-2.42	1.92-3.20
Free Air Delivery * # @ 145 psi	cfm	15-31	32-54	45-76	51-85	68-113
Motor ^ Power	kW	7.5	11	15	18.5	22
Motor ^ Power	hp	10	15	20	25	30
Tank Volume	Litre	450	450	450	560	560
Noise Level @ 1 m	dB(A)	69	71	71	71	71
Air Outlet Size	BSP	3/4” F	1” F	1” F	1” F	1” F
Dimensions W	cm	167	167	167	186	186
Dimensions D	cm	67	71	71	77	77
Dimensions H	cm	167	175	175	178	178
Weight Wet	kg	407	458	478	615	635

- Per ISO 1217:2009 Annexes C and E.
8 bar (116 psi) configuration is standard.
^ Electricity supply: 400 V, 3-Phase, 50 Hz.

Warranty

12-month parts and labour factory-backed warranty.

Features

Integrated, ready-to-run compressed air station supplies clean, dry compressed air with low installation cost and floor-space requirements.
Compact European design concepts and heavy-duty components suit Australia’s harsh operating conditions.
Soundproofed cabinet and anti-vibration mounting allow installation directly at the work site.
Precision rotary screw air-end with advanced rotor profile and slow rotor speed provides 24/7 reliability, high flow, low energy consumption and long service life.
Permanent magnet variable speed motor offers higher efficiency across a wider operating range than conventional induction motors. Direct drive eliminates belt-transmission losses.
Microprocessor-based VSD optimises motor speed and power to match air demand, reducing consumption, operating costs and unnecessary load/unload cycling.
Electronically adjustable 8 or 10 bar pressure settings require no mechanical modification.
Quieter operation, reduced vibration, improved reliability and lower maintenance requirements.
Largest-in-class air receiver reduces pressure fluctuations and improves condensate removal.
Multi-function electronic controller with LED display supports operation, monitoring, protection, maintenance scheduling, sequential control and remote start/stop.
Refrigerant dryer occupies a thermally segregated compartment for continuous moisture removal.
Pre- and post-filters with element condition gauges remove particulates down to 0.01 micron and limit oil carry-over to 0.01 ppm.
Timer drain valves share a single connection for automatic, clean and safe condensate disposal from the receiver, dryer and filters.
Lift-off cabinet panels, air-treatment access panels, spin-on oil filter and air/oil separator elements simplify maintenance and minimise downtime.
Equipment includes cooling fan, dryer cooling fan, condenser, oil cooler and air after-cooler, oil level gauge, electrical cabinet, pressure controller, dryer control button, dryer fault indicator and emergency stop button.
Compliant with Australian Workplace Health and Safety Regulations for industrial workplace use.
Each compressor undergoes a 100-point pre-delivery inspection and full-load testing in Australia.

Specifications

Parameter	Unit	CM8	CM11	CM15	CM18	CM22
Free Air Delivery * # @ 8 bar	m3/min	0.47-1.10	0.95-1.78	1.29-2.45	1.51-2.85	1.95-3.68
Free Air Delivery * # @ 116 psi	cfm	16-39	33-63	45-87	53-101	69-130
Free Air Delivery * # @ 10 bar	m3/min	0.44-0.88	0.92-1.53	1.28-2.14	1.45-2.42	1.92-3.20
Free Air Delivery * # @ 145 psi	cfm	15-31	32-54	45-76	51-85	68-113
Motor ^ Power	kW	7.5	11	15	18.5	22
Motor ^ Power	hp	10	15	20	25	30
Tank Volume	Litre	450	450	450	560	560
Noise Level @ 1 m	dB(A)	69	71	71	71	71
Air Outlet Size	BSP	3/4” F	1” F	1” F	1” F	1” F
Dimensions W	cm	167	167	167	186	186
Dimensions D	cm	67	71	71	77	77
Dimensions H	cm	167	175	175	178	178
Weight Wet	kg	407	458	478	615	635

- Per ISO 1217:2009 Annexes C and E.
8 bar (116 psi) configuration is standard.
^ Electricity supply: 400 V, 3-Phase, 50 Hz.

Warranty

12-month parts and labour factory-backed warranty.

Read less...

To contact Glenco Air & Power about Senator CM Series Rotary Screw Air Compressor use Get a quote.

CM Series Rotary Screw Air Compressor(5.17MB)

Let Glenco Air & Power provide you with a quote

Supplier

Supplier: Glenco Air & Power

Location: Parkinson, QLD

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Glenco Air & Power are also proudly displaying these credentials:

Location:

Parkinson , QLD

Joined:

Nov 2026

Level:

SitePartner Storefront

Verified:

Is this your product? Manage products / company details |

Report this product