The filling hose has a nozzle assembly fitted to the end of the hose. This nozzle assembly incorporates start and stop push buttons which start and stop the filling system.
Filling Nozzle: UPVC construction with Hastalloy valve shaft
Suits containers from 10 to 200 litres
Control Box: Glass fibre reinforced polyester
Macnaught Oval Gear flow meter (suitable for use with 12.5% Sodium Hypochlorite)
PVC flexible fluid line to the filling nozzles
In line Liquid Filter
Simple touch switch programming with English statement prompts
Low cost - High performance
Batch controller with large LCD display and white LED back light
Low flow alarm with batch cancel
Programmable delay on relay two start and pre-stop
Single head shut off nozzle
Fill by weight or volume
Fail safe control valves
All stainless steel frame
Chemical resistant Teflon seals
Supplied with Air or Electric Pump
Supplied with Positive Displacement or Magnetic Flow Meter
Hand held or fixed nozzle with air actuation and remote stop start
Applications include chemical, oil and swimming pool chemicals
85 to 265 VAC 50-60Hz electric and 15 bar compressed air supply
Manufactured in Australia
The filling system comprises the following control components:
An IP67 weatherproof electrical enclosure
An Innovec Batch Controller with an IP67 front panel
Emergency stop button
Air regulator for a compressed air diaphragm pump
All internal wiring and piping to enable the user to get into production
Tested for operation prior to shipping
PVC nozzle assembly comprises:
Complete nozzle and handle assembly with 10 metres of filling hose
Air operated remote start and stop buttons for safety
Airline and filling hose assembly
The pump and flow meter are chosen to suit the application
The following additional information is usually required to properly engineer the application.
Viscosity of the product to be pumped and filled into containers
Specific gravity of the product
Name of the product or type of chemical
With this portable system it can be wheeled (or pushed) next to the tank where the filling is to be done. The filling hose has a nozzle assembly fitted to the end of the hose. This nozzle assembly incorporates start and stop push buttons which start and stop the filling system.
The operator can configure the system for a 5 gallon fill, hold the nozzle over the container to be filled and press the start button. Liquid will flow and when five gallons has been pumped the system will automatically shut off. The operator can then move onto the next container to be filled. Please note: If during a 5 gallon fill the operator has put 3 gallons into a container and needs to stop the filling process temporarily, then that can be achieved by pressing the stop button. The operator can then continue by pressing the start button and put the remaining 2 gallons into the container.
Innovec Controls | Process Instrumentation
Innovec Controls is Solutions That Work. We can offer products that will do what you want, when you want.
Whether it be counting bottles on a production line, flow measurement, a fuel gauge or a fuel ...