Smoke Security | SY 4000
Smoke Security | SY 4000
Smoke Security, the Smokecloak SY 4000 has been specifically developed for use in mid to large size areas where the full Smokecloak functionality is required. i.e. ATM protection, domestic installations, offices, factories, and safe rooms, etc.
Smoke Security | Smokecloak SY 4000
The Smokecloak SY 4000 is a highly advanced and dedicated security product that has been developed with the goal of creating instant protection in case of an intrusion. All Smokecloak products are fully compatible with, and can be integrated into, any modern detection and alarm system.
All Smokecloak Units feature built in brackets and plug-in connections for ease of installation. The unique and patented Cloaksensor can easily be positioned with the built in confirmation system and automatically ensures the correct smoke output is maintained until the alarm system is deactivated.
The system also support verification movement detectors to help eliminate unwanted activations from false alarms. Depending on the need, a Smokecloak instant protection solution can consist of one or more Smokecloak units.
Features
- Uses Smokecloak FL600 fluid
- Can be integrated with most existing alarm systems.
- High quality Design
- Can continuously generate smoke for up to 220 Seconds.
- Calibrated fluid sensor
- Battery Backup
- Thermocouple temperature sensing with overheat protection.
- Can be integrated with other Smokecloak products.
- METAL CONSTRUCTION and Vandal resistant. (AS2201.1.1998)
- Battery Back up
- Cloaksensor density control (exclusive to Smokecloak only)
- allowing continuous auto Re-Activation
- The state-of-the-art electronics, which incorporate microprocessor control, provide a broad range of error checking and reporting facilities which monitor and can be interfaced with your alarm system including.
- Monitoring and Multi zone reporting options
- Low Fluid.
- System Trouble - Faulty or Low battery, Heat Exchanger, No Fluid, System Circuits fault, etc.
- AC Fail.
- System Activation.
- Unit Tampers.
- System Isolation.
Quality, Design Standards
- (Intruder alarm equipment and installed systems.)
- BS7939:1999 (Security Fog Devices.)
- Australian C tick Certified (Required by Australian Law)
- Forskrift 212 (intruder alarm systems to Danish Standards )
Product specifications:
- 255m3in 30 Seconds
- 510m3in 60 Seconds
- Uses SmokeCloak FL600 fluid
To contact Smokeshield Pty Ltd about Smoke Security | SY 4000 use Get a quote.
Smoke Security | Smokecloak SY 4000
The Smokecloak SY 4000 is a highly advanced and dedicated security product that has been developed with the goal of creating instant protection in case of an intrusion. All Smokecloak products are fully compatible with, and can be integrated into, any modern detection and alarm system.
All Smokecloak Units feature built in brackets and plug-in connections for ease of installation. The unique and patented Cloaksensor can easily be positioned with the built in confirmation system and automatically ensures the correct smoke output is maintained until the alarm system is deactivated.
The system also support verification movement detectors to help eliminate unwanted activations from false alarms. Depending on the need, a Smokecloak instant protection solution can consist of one or more Smokecloak units.
Features
- Uses Smokecloak FL600 fluid
- Can be integrated with most existing alarm systems.
- High quality Design
- Can continuously generate smoke for up to 220 Seconds.
- Calibrated fluid sensor
- Battery Backup
- Thermocouple temperature sensing with overheat protection.
- Can be integrated with other Smokecloak products.
- METAL CONSTRUCTION and Vandal resistant. (AS2201.1.1998)
- Battery Back up
- Cloaksensor density control (exclusive to Smokecloak only)
- allowing continuous auto Re-Activation
- The state-of-the-art electronics, which incorporate microprocessor control, provide a broad range of error checking and reporting facilities which monitor and can be interfaced with your alarm system including.
- Monitoring and Multi zone reporting options
- Low Fluid.
- System Trouble - Faulty or Low battery, Heat Exchanger, No Fluid, System Circuits fault, etc.
- AC Fail.
- System Activation.
- Unit Tampers.
- System Isolation.
Quality, Design Standards
- (Intruder alarm equipment and installed systems.)
- BS7939:1999 (Security Fog Devices.)
- Australian C tick Certified (Required by Australian Law)
- Forskrift 212 (intruder alarm systems to Danish Standards )
Product specifications:
- 255m3in 30 Seconds
- 510m3in 60 Seconds
- Uses SmokeCloak FL600 fluid
To contact Smokeshield Pty Ltd about Smoke Security | SY 4000 use Get a quote.
The Smokecloak SY 4000 is a security fog device designed to create instant protection during an intrusion across mid-to-large areas. Its patented Cloaksensor automatically maintains the correct smoke output until the alarm system is deactivated. Domestic installations, offices and factories are among its intended settings, and it also integrates with modern detection and alarm systems.
- Generates smoke continuously for up to 220 seconds
- Produces 255 m³ of smoke in 30 seconds
- Battery backup; thermocouple temperature sensing includes overheat protection
- Microprocessor reporting covers low fluid, system trouble, AC failure, activation, tampering and isolation
- Australian C-Tick certified
Source: listing by Smokeshield Pty Ltd on IndustrySearch · Updated 2 Nov 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Smokeshield Pty Ltd on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales