Fire Safety Training | Trainer X-Stream
By incorporating the X-Stream Airflow System, the Trainer X-Stream blends smoke and air to produce a variety of effects; from an optically translucent haze to an immensely dense “white-out” of smoke.
The Trainer X-Stream has been designed to deal with the excessive rigors of training, with a rigid chassis, protected on all eight corners by 20mm aluminium plates, and 40mm lifting bars. The outer casing and control panel also offer a degree of protection in poor weather conditions, making the Trainer X-Stream ideal for outdoor use.
Overheat protection is also guaranteed through a unique, Direct Thermal Protection device. The Trainer X-Stream is fed by a massive 19-litre (5 US gallons) capacity.
Basic control is also possible via the Trainer X-Stream’s remote (optional), allowing the machine to be fired at preset levels. This, coupled with the analogue link facility, permits multi-machine control from a single MSS multifunctional controller.
- Heat Exchanger
- 2 x 2500w with 18 minute time and overheat
- 5000Cubic meters per Min and rated continuous (at lower Output).
- Remote connection using 3 pin XLR.
- 22.5amps @ 220v.
- (LxHxW) 1140mm x645mm x 655mm.
- Fluid Types
- Heavy or Medium.
- Fluid System:
- 2 *9.5ltr containers
- Consumption: 500ml / Min.
- Accessories: Trainer X-Stream remote.& Ducting System.