ELEQ - UAK - Easy Voltage Tap for Busbar

Read more...

Need more information? Message SmarterCtrl (A division of Industrial Automation Group) via the form, or call and say you found them on IndustrySearch so they can best assist you.

The UAK series of insulated busbar terminals let you connect your instruments to live busbars. A fuse holder is an integrated part of
this terminal, proving you with protection at the source. The terminal can be installed directly onto the busbar using an insulated
Allen key driver. This makes the installation of this unique product a one handed exercise. The UAK can be used for temporary or
permanent voltage measurements.

The fuse holder is mounted directly on the metal that makes contact with the busbar, thereby providing a secure connection with a
high short circuit rating. For connection to the Netural bar, the model UAK16 provides an unfused connection

Technical specifications

Maximum voltage: 690V
Test voltage / spike: 3kV/50Hz 6kV
Max current: 10A
Isolation class: E (max120°)
Fuse type: 5x25mm (with indicator) 10A SIBA DIN41576-2
Short circuit rating: [email protected]/50Hz
IP rating: IP20
Ambient temperature: –5...+40°C  (1)
Temperature rise busbar: Max. 75K (1)

Busbar connection: Via Allen key bolt M8
Allen key size: Number 6
Busbar thickness: Max 15mm/Min 4mm
Housing: Polyamide (PA6.6)
Material terminal: Nickel plated brass
Clapsing on Rail: Allen bolt M8, Allen key no. 6, tightening torque. 6Nm, max. 8Nm

1) Maximum temperature of the busbar: 120ºC(Sum of the busbar temperature rise and the ambient temperature) KEMA certified, IEC60947-7-3

Read less...

Need more information? Message SmarterCtrl (A division of Industrial Automation Group) via the form, or call and say you found them on IndustrySearch so they can best assist you.