Lackeby Wastewater Screening Equipment | ...

Lackeby - Wastewater Screening Equipment | Wire Bar Screen

Wastewater Screening Equipment | Wire Bar Screen

Designed for installation in deep and wide channels with limited ceiling height

In Stock

Lackeby Wire bar screen is a cable-driven coarse screen designed for installation in deep and wide channels and very suitable for installation where ceiling heights are limited because the screen’s total height is low compared to other bars on the market. The screen is completely covered and can be delivered complete with control cabinet.

Benefits

Handles unlimited channel and water depth
Available for channel widths up to 3 meters
Strong design that is insensitive to sand and coarse debris
Suitable for installations in new and existing installations because the required installation height is significantly lower than other brands in the market, providing a low total investment cost
Low operating and maintenance cost

General

The screening which sticks to the rods are transported by the rake. An automatic scraper cleans the rake. Raising and lowering of the rake is made with wire and the rake’s holding pressure is controlled by a hydraulic actuator. The rake is controlled by sliding plates along one arm placed in a beam construction. No moving parts other than the rake is in contact with the water. The arm is pivoted in the frame’s upper part. The frame is made of rigid steel and has a covered enclosure in order to avoid accidents.

Operation

Raising and lowering of the rake is operated by a reel of wire, the driving unit and the limit switches. The arm’s movements are controlled by hydraulics. The cylinder is actuated by a hydraulic unit with tank, pump, filter, valve and pressure gauge. Overload protection is included. Hydraulic cylinders are mounted in a way that facilitates easy service and maintenance.

Automation

Lackeby Wire bar screen can be delivered with control cabinet for fully automatic operation. It is provided with Hand-O-Auto selector, fuses, relays and indication lamps. The automatic cabinet can also be equipped with timer and level meter.

To contact Pump Systems Ltd. about Lackeby Wastewater Screening Equipment | Wire Bar Screen use Get a quote.

Benefits

Handles unlimited channel and water depth
Available for channel widths up to 3 meters
Strong design that is insensitive to sand and coarse debris
Suitable for installations in new and existing installations because the required installation height is significantly lower than other brands in the market, providing a low total investment cost
Low operating and maintenance cost

General

Operation

Automation

Read less...

To contact Pump Systems Ltd. about Lackeby Wastewater Screening Equipment | Wire Bar Screen use Get a quote.

Product Sheet(0.95MB)

AI Overview BETA

Lackeby Wire Bar Screen is a cable-driven coarse screen that uses a rake to move material caught on its bars. An automatic scraper cleans the rake, removing screenings that stick to it during operation. For new or existing installations, its low required installation height suits sites with limited ceiling clearance compared with other bars on the market.

Only the rake has moving parts in contact with water
Overload protection is included
Covered enclosure around the rigid-steel frame helps avoid accidents
Channel widths up to 3 m; handles unlimited channel and water depth
Control cabinet for fully automatic operation; timer and level meter also available

Source: listing by Pump Systems Ltd. on IndustrySearch · Updated 2 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Pump Systems Ltd. provide you with a quote