Din Rail Relay H 4136
Din Rail Relay H 4136
Din Rail Relay H 4136 is suitable for the switching of safety-related circuits.
Din Rail Relay H 4136
Safety-related, for circuits up to SIL 3 according to IEC 61508
The module is tested according to
- IEC 61508, Part 1 - 7:2000
- IEC 61511, Part 1 - 3:2004
- ANSI/ISA S84.00.01:2004
- EN 50156-1:2004, DIN VDE 0116:1989
- EN 60664-1:2003
- EN 50178:1997 VDE 0160
- EN 61131-2:2004
- EN 298:2003
- NFPA 85:2007, NFPA 86:2007
Thus the relay can be used for safety shutdowns, e.g. to cut off the entire fuel supply for combustion plants.The module is equipped with relays in diversity.
- Input 48 VDC / -15...+20 %, . 20 mA
- Output floating NO contact
- Relay data: cf. reverse
- Switching time approx. 8 ms
- Reset time approx. 6 ms
- Ambient conditions -25...+60 ‹C
- Degree of protection IP 20 according to IEC/EN 60529 (VDE 0470 part 1)
To contact Hima about Din Rail Relay H 4136 use Get a quote.
Din Rail Relay H 4136
Safety-related, for circuits up to SIL 3 according to IEC 61508
The module is tested according to
- IEC 61508, Part 1 - 7:2000
- IEC 61511, Part 1 - 3:2004
- ANSI/ISA S84.00.01:2004
- EN 50156-1:2004, DIN VDE 0116:1989
- EN 60664-1:2003
- EN 50178:1997 VDE 0160
- EN 61131-2:2004
- EN 298:2003
- NFPA 85:2007, NFPA 86:2007
Thus the relay can be used for safety shutdowns, e.g. to cut off the entire fuel supply for combustion plants.The module is equipped with relays in diversity.
- Input 48 VDC / -15...+20 %, . 20 mA
- Output floating NO contact
- Relay data: cf. reverse
- Switching time approx. 8 ms
- Reset time approx. 6 ms
- Ambient conditions -25...+60 ‹C
- Degree of protection IP 20 according to IEC/EN 60529 (VDE 0470 part 1)
To contact Hima about Din Rail Relay H 4136 use Get a quote.
Hima’s Din Rail Relay H 4136 is a safety relay module for switching safety-related circuits through a floating, normally open output contact. It is suitable for safety-related circuits up to SIL 3 under IEC 61508 and can be used in safety shutdowns. Combustion plants can use it to cut off the entire fuel supply during a safety shutdown.
- Tested to IEC 61511, ANSI/ISA S84.00.01 and EN 50156-1
- 48 VDC input, -15% to +20% tolerance, 20 mA
- Approx. 8 ms switching time; approx. 6 ms reset time
- Ambient conditions: -25 to +60 °C
- IP 20 protection under IEC/EN 60529
Source: listing by Hima on IndustrySearch · Updated 31 Oct 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Hima on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Modulo PM Series of Protection/Safety Relays
Multi-Function Level Control Relay | LVM40 Single-Voltage
Level Control Relay | LVM30 Dual-Voltage
Thermistor Protection Relays
Retransmit Dual Alarms & Trip Safety Relays - THT Model C2469
TTT - C2467 | Trip Safety Relays & Retransmit Dual Alarm
Safety Relays
Din Rail Relay - H 4116
Din Rail Relay H 4133
Din Rail Relay H 4134
Din Rail Relay H 4135A
Safety Relays & Controllers
Safety Products - Safety Relays
Safety Relay Module | SRM
Multifunctional Safety Relay for Smaller Machines | PSR-MXF
Motor Protection Relay - Samwha - EOCR-DS3
Safety Relays and Controls | MSI 400
Safety Relays and Safety Controller
Guardmaster Configurable Safety Relay | 440C-CR30
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales