FOSS Wine Analyser | WineScan™ SO2
FOSS - Wine Analyser | WineScan™ SO2
WineScan™ SO2 ensures full control of the winemaking process from grape harvest to bottling. Ready-to-use calibrations allow simultaneous analysis of key wine quality parameters including free and total SO2.
Value
Full control of the entire winemaking process. Analyse +20 parameters in 30 seconds. Convenient sulphite analysis in just 2 minutes. Low cost per sample. Intuitive operator interface.
Sample Type
Must, must under fermentation, finished wine and sweet finished wine.
Parameters
+20 parameters including: Ethanol, sugars, organic acids, pH, colour, free and total SO2.
Features
Free and total SO2 results in two minutes
- Based on aeration-oxidation method reaction
- Analytical performance compared to OIV approved method
- Fully automated and integrated to WineScan™ measurement
- No contact with dangerous chemicals
- Lost cost analysis
Reliable results from robust calibrations
- Ready to use calibrations for all wines
- More than 105.000 reference analysis data included
- Documented analytical performance
Configured to suit your needs
Available Options
- Auto sampler with up to 120 cups
- Mosaic networking software
- Colour module measuring at 420 nm, 520 nm and 620 nm
- Grape soundness indexes to detect infections
- FTIR calibrator software for own calibration modelling
Instrument standardisation
WineScan™ instruments are standardised for high stability to give the same results regardless of any wear on the cuvette.
FossAssure™
FossAssure™ is a WineScan™ digital service designed to reduce product waste, secure brand protection and increase profitability by ensuring the quality and precision of your analytical results. Besides, FossAssure™ services will also improve instrument uptime and reduce production costs by optimising the operation and the performance of your instruments.
Specifications
| System Description WineScan™ SO2 consists of the analyser and Foss Integrator software. Options for WineScan™ SO2 include the possibility to upgrade with colour (VIS) module and to automatic version with XY Autosampler. |
|||
|
Flex* Finished wine: (Ethanol, glucose/fructose, malic acid, volatile acid, total acid, pH, free sulphur dioxide, total sulphur dioxide) |
|||
|
Without SO2 analysis switched on: |
30 seconds (excl. SO2, see below) |
||
| Carry-over | <1% | ||
| Sample Temperature | 5 - 35ºC | ||
| Sample Volume | Programmable 4 - 25 ml, standard volume is 7 ml for Flex and 8 ml for Auto version | ||
| Optical System | Hermetically sealed, humidity control | ||
| Cleaning | Automatic and programmable | ||
| Calibration routines | Slope & intercept adjustment | ||
| Options in WinISI™ SW package | PLS (Partial Least Squares) and modified PLS calibrations and PCA (Principal Component Analysis). Flexible selection of spectral intervals. | ||
| With SO2 analysis switched on Analysis time |
150 seconds (options for fast hydrolysis time of 86 seconds) |
||
| Carry-over | < 2% | ||
| Sample Temperature | 5 - 35ºC | ||
| Sample Volume | Fixed 4.2 ml to be added (total 8.2 - 29.2 ml) | ||
| Hydrolysis agent | 4 ml 25% Phosphoric acid | ||
| Optical System | Independent detector, hermetically sealed, humidity control | ||
| Cleaning | Automatic and programmable | ||
| Calibration routines | Slope & intercept adjustment | ||
| WinISI™ SW options | no SO2 - 32 liquid parameters available | ||
| FTIR Calibrator | FTIR Calibrator software for PLS calibration development | ||
| * WineScan Auto is configured with an autosampler for the busy laboratory, WineScan Flex has manual sample intake. | |||
| Installation requirements | |||
| Power supply | 100 - 240 VAC ±10% – 50 - 60 Hz | ||
| Power consumption | Max. 600 VA during measurement, 200 VA in standby | ||
| Ambient temperature | 5 - 35ºC | ||
| Ambient humidity | < 80% RH, cyclic up to 80% RH when going from low to high ambient temperature | ||
| Weight | 89 kg for WSC Flex; 97,4kg incl. XY Autosampler | ||
| Dimensions (H×W×D) | 54×88×47.3 cm (excl. PC) | ||
| Environment | For best performance, place the instrument on a stable surface away from excessive and continuous vibration | ||
| Degree of protection | IP43 (IP43 PC is optional) | ||
| Noise Level | < 70 dB | ||
| Fuse | T 10.0 A | ||
| Installation category | II | ||
| Pollution degree | 2 | ||
| Altitude | < 2000 m | ||
| XY Auto Sampler | |||
| Power supply | 100 - 240 VAC ±10% – 50 - 60 Hz | ||
| Weight | 8.4 kg | ||
| Dimensions (H×W×D) | 61 × 33 × 50.8 cm (with sample probe) | ||
To contact FOSS about FOSS Wine Analyser | WineScan™ SO2 use Get a quote.
Value
Full control of the entire winemaking process. Analyse +20 parameters in 30 seconds. Convenient sulphite analysis in just 2 minutes. Low cost per sample. Intuitive operator interface.
Sample Type
Must, must under fermentation, finished wine and sweet finished wine.
Parameters
+20 parameters including: Ethanol, sugars, organic acids, pH, colour, free and total SO2.
Features
Free and total SO2 results in two minutes
- Based on aeration-oxidation method reaction
- Analytical performance compared to OIV approved method
- Fully automated and integrated to WineScan™ measurement
- No contact with dangerous chemicals
- Lost cost analysis
Reliable results from robust calibrations
- Ready to use calibrations for all wines
- More than 105.000 reference analysis data included
- Documented analytical performance
Configured to suit your needs
Available Options
- Auto sampler with up to 120 cups
- Mosaic networking software
- Colour module measuring at 420 nm, 520 nm and 620 nm
- Grape soundness indexes to detect infections
- FTIR calibrator software for own calibration modelling
Instrument standardisation
WineScan™ instruments are standardised for high stability to give the same results regardless of any wear on the cuvette.
FossAssure™
FossAssure™ is a WineScan™ digital service designed to reduce product waste, secure brand protection and increase profitability by ensuring the quality and precision of your analytical results. Besides, FossAssure™ services will also improve instrument uptime and reduce production costs by optimising the operation and the performance of your instruments.
Specifications
| System Description WineScan™ SO2 consists of the analyser and Foss Integrator software. Options for WineScan™ SO2 include the possibility to upgrade with colour (VIS) module and to automatic version with XY Autosampler. |
|||
|
Flex* Finished wine: (Ethanol, glucose/fructose, malic acid, volatile acid, total acid, pH, free sulphur dioxide, total sulphur dioxide) |
|||
|
Without SO2 analysis switched on: |
30 seconds (excl. SO2, see below) |
||
| Carry-over | <1% | ||
| Sample Temperature | 5 - 35ºC | ||
| Sample Volume | Programmable 4 - 25 ml, standard volume is 7 ml for Flex and 8 ml for Auto version | ||
| Optical System | Hermetically sealed, humidity control | ||
| Cleaning | Automatic and programmable | ||
| Calibration routines | Slope & intercept adjustment | ||
| Options in WinISI™ SW package | PLS (Partial Least Squares) and modified PLS calibrations and PCA (Principal Component Analysis). Flexible selection of spectral intervals. | ||
| With SO2 analysis switched on Analysis time |
150 seconds (options for fast hydrolysis time of 86 seconds) |
||
| Carry-over | < 2% | ||
| Sample Temperature | 5 - 35ºC | ||
| Sample Volume | Fixed 4.2 ml to be added (total 8.2 - 29.2 ml) | ||
| Hydrolysis agent | 4 ml 25% Phosphoric acid | ||
| Optical System | Independent detector, hermetically sealed, humidity control | ||
| Cleaning | Automatic and programmable | ||
| Calibration routines | Slope & intercept adjustment | ||
| WinISI™ SW options | no SO2 - 32 liquid parameters available | ||
| FTIR Calibrator | FTIR Calibrator software for PLS calibration development | ||
| * WineScan Auto is configured with an autosampler for the busy laboratory, WineScan Flex has manual sample intake. | |||
| Installation requirements | |||
| Power supply | 100 - 240 VAC ±10% – 50 - 60 Hz | ||
| Power consumption | Max. 600 VA during measurement, 200 VA in standby | ||
| Ambient temperature | 5 - 35ºC | ||
| Ambient humidity | < 80% RH, cyclic up to 80% RH when going from low to high ambient temperature | ||
| Weight | 89 kg for WSC Flex; 97,4kg incl. XY Autosampler | ||
| Dimensions (H×W×D) | 54×88×47.3 cm (excl. PC) | ||
| Environment | For best performance, place the instrument on a stable surface away from excessive and continuous vibration | ||
| Degree of protection | IP43 (IP43 PC is optional) | ||
| Noise Level | < 70 dB | ||
| Fuse | T 10.0 A | ||
| Installation category | II | ||
| Pollution degree | 2 | ||
| Altitude | < 2000 m | ||
| XY Auto Sampler | |||
| Power supply | 100 - 240 VAC ±10% – 50 - 60 Hz | ||
| Weight | 8.4 kg | ||
| Dimensions (H×W×D) | 61 × 33 × 50.8 cm (with sample probe) | ||
To contact FOSS about FOSS Wine Analyser | WineScan™ SO2 use Get a quote.
Chemwell Discrete Analyser
Chemwell-T Discrete Analyser
Wine Analyser | OenoFoss™ Go
Wine Analyser | OenoFoss™
FTIR Wine Analyzer | Lyza 5000 Wine
Wine Analyser | Oenological Analysers – Wine Making
Wine Analyser | MT01
Wine Analyzer | Hyperlab SMART
Wine Analyser | Cold Stability Analyzer Criocheck
Wine Analyzers | Hyperlab Plus And Basic Wine Analyzers
Spectraalyzer Wine
Alcolyzer 3001 | For Beer, Spirits, Wine & Sake Alcohol Analysis
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales