iDuctor W1200 | Handheld Induction Heating Tool | IDPRO-W1200-ANZ Price Guide: $2,085

Read more...

To contact Maintenance & Reliability Equipment about iDuctor W1200 | Handheld Induction Heating Tool | IDPRO-W1200-ANZ use Get a quote.

IDUCTOR used induction technology, this electronic device allows a wide range of ferrous metals to be heated from the inside out. What makes induction heating unique is that it mainly heats the outermost components, unlike a gas torch that heats up everything at the same time. The difference in temperature between the heated parts and the main body make them easier to loosen and remove. In a matter of seconds, a specific part or spot can be heated up to red hot*, in the case of steel to between 300°C and 600°C

With 1200 Watts of Power and 6 Power/Time settings the iDuctor is a Versatile, Quick, Clean, Efficient and most importantly Safe way of heating ferrous metal components for MRO (Maintenance, Repair & Operation).

Key Features:

• Ergonomic handheld unit
• 1200 Watts of power
• 6 Power/Time settings
• Large range of accessories
• Microprocessor controlled
• Voltage protection
• Thermal protection
• Up to 30 minutes of continuous operation

The iDuctor has many uses, including loosening of:

• Seized or rusted nuts
• Bolts
• Spindles
• Nipples
• Bearings, and more

IDPRO-W1200-ANZ Kit includes:

• 8 Heating Coils - Suit nut sizes from M8 to M30
• 1 Flexcoil 1100mm Long
• 1 IEC Lock Power Cord 3000mm Long
• 1 Foam Lined Plastic Carry Case

Note: In practice, it’s generally not necessary to heat components to a red-hot temperature; excessive temperatures can, in fact, degrade the metal and damage the coil. The images on this website show the iDuctor glowing red hot; this is just for illustration purposes, to demonstrate the power of the iDuctor.

Read less...

To contact Maintenance & Reliability Equipment about iDuctor W1200 | Handheld Induction Heating Tool | IDPRO-W1200-ANZ use Get a quote.