Rapid Heat 35 Induction Heating System

Read more...

Need more information? Message Rapid Heat Systems via the form, or call and say you found them on IndustrySearch so they can best assist you.

The Rapid Heat 35 is designed to replace open-flame or resistance heating.

• Outperforms propane or radiant heating in efficiency, ease of use and heating uniformity
• Simple interface can be learned in a matter of minutes and provides operator tutoring
• Can be used as an air-cooled or liquid-cooled system
• Easily connected to a range of heating elements
• Can be used with or without a temperature recorder

The Rapid Heat 35 System has a choice of four programmes Pre-Heat, Bake-Out, P.W.H.T. and Custom. In the programme you can set the target temperature, soak time/temperature, cool down temperature/rate deg/hr, ramp rate deg/hr, etc. The Rapid 35 controller will then monitor the attached thermocouples to ensure that the heating and cooling rates are not violated during the procedure.

Heating Elements - Our equipment works using various different types of Heating Blankets (air-cooled), Heating Cables (liquid-cooled), Coils and Clamps.

Air Cooled System

• Air-Cooled blankets are used for pre-heat only and can provide uniform heating up to 204°C (400°F)
• Our blankets come in sizes to fit pipes or plates from 8.625" diameter (40" long) to 56" diameter (185" long). The blankets are reusable and are easily installed in a matter of seconds. They are made from durable, high-temperature materials to withstand the tough conditions in both industrial and construction applications.

Liquid Cooled System

• Liquid-cooled heating cables are can provide uniform heating up to 788°C (1450°F). They are ideal for both pre-heat and PWHT needs including Stress Relieving, Hydrogen Bake-Out, Shrink Fitting and many other applications.
• Our liquid cooled heating cables come in sizes 30ft, 50ft, 80ft and 140ft. The silicone cable encloses a special copper conductor specifically designed for carrying high-frequency current to maximise efficiency. The cable also carries the coolant, which cools the conducting wire. The cable is reinforced for strength and durability they are reusable and easily installed in a matter of seconds.

Pre Heat Cable Covers

• We provide preheat cable covers that must be used to protect the heating cable from slag and molten metal created during welding. They are easy to install and can withstand temperatures of up to 343°C (650°F).

Read less...

Need more information? Message Rapid Heat Systems via the form, or call and say you found them on IndustrySearch so they can best assist you.