With the EE776, the consumption of compressed air, nitrogen, CO2 or other non-corrosive and non-flammable gases can be measured up to a pressure of 16 bar, for example.
Patented non-return protection for secure mounting
The EE776 flow meter set new standards in terms of safety and easy assembly. The patented non-return protection combines three functions in one device:
The sensor can only be pushed in one direction during installation. The sensor cannot return at all, even if it is released.
By means of an encapsulated O-ring, no compressed air can escape under pressure during assembly.
The precise positioning with respect to immersion depth and orientation is easy to perform, guaranteeing accurate measurement results.
An optional ½“ ball valve enables the installation and removal of the sensor without interrupting the flow in the compressed air line. The high measurement accuracy of 2.5% from reading results from the application-oriented factory adjustments, which are undertaken at 9 bar pressure. Two signal outputs are available to output the measured values. Depending on the application, these can be configured as an analogue output (current or voltage), switching output or pulse output for consumption measuring.
Non-return protection for secure mounting
Assembly/disassembly under pressure without flow interruption
Easy and accurate positioning
Pipe diameters DN50 to DN300
Pressure range up to 16 bar (PN16)
Wide measuring range up to 200 Nm/s
ECEFast | Industrial Monitoring Equipment
ECEFast is your single source provider for all industrial instrumentation, measurement and control equipment. We specialise in sourcing the best brands at the best prices, from low cost to advances ...