The SIL 2 Compliant FS10i Flow Switch/Monitor is ideal for manufacturing operations, compressed air, industrial systems, pumps, gas compressors, and HVAC operation which require flow assurance and alarming.
The compact SIL 2 compliant FS10i Flow Switch/Monitor from Fluid Components International (FCI) sets a new standard for superior performance and highly reliable operation.
Wherever detection and user warning of a flow rate that is either too high, too low or a no-flow condition is required, the FS10i Flow Switch/Monitor is the solution. In air, gases, water or other liquids, its independently rated SIL 2 compliance ensures a highly reliable flow sensing instrument for repeatable and fast-responding flow trip point or alarm warning within seconds.
The FS10i Flow Switch/Monitor features air/gas sensitivity and set point range from 0.076 to 122 MPS and for water or liquids from 0.003 to 0.15 MPS. It is suitable for use in fluid temperatures from -- 40° to 212°C and at pressures up to 138 bar.
Unlike similar devices, the FS10i Flow/Switch Monitor comes standard with both a 1A relay output for alarm/trip point setting instead of an open collector, and a 4-20 mA analog output for trending and monitoring. Trip points can be set as high or low, and they can be adjusted with hysteresis and/or time delay settings and the 4-20mA output is rangeable by the user in the field installation.
Applications for the FS10i Flow Switch/Monitor include cooling water and fluids, leak detection, lubricant flow assurance, ventilation verification, chemical injection assurance, nitrogen purge verifications and compressor leak detection.
Developed with FCI’s advanced no-moving parts thermal dispersion sensing technology, the FS10i Flow Switch/Monitor is temperature compensated for dynamic plant and process operating conditions. It is constructed of all wetted parts manufactured with 316L stainless steel and Hastelloy C22 thermowells for years of service with virtually no maintenance.
AMS Instrumentation & Calibration Pty Ltd (AMS) has been in existence for more than 38 years supplying calibration equipment and industrial instrumentation to all industries. With more than 225 years of instrumentation experience of staff, we are sure we can offer our customers a solution to their problems. AMS has a proven track record of satisfied customers, which we believe is the true measurement of an effective sales / service organisation.
Sales, Service and Engineering Suppliers of Industrial Instrumentation, Calibration Equipment to all Industries.
AMS represents the following companies: Beamex, Bellofram, FCI, Interface, London Electronics, Redpost, Tek-Know, and Yamatake, Azbil, PAC, Hitech Instruments, Michell Instruments, McCrometer, Thommen, Trimec Flow Products, Noshok, Wess, Process Control, Katronic