Pipe Insulation
Pipe Insulation
All grades of Thermotec pipe insulation have similar performance in relation to operating temperature, thermal conductivity, non-toxicity and moisture absorption.
Fire performance, noise attenuation, chemical resistance, size, wall thickness availability and cost are factors which will usually lead to the selection of a specific grade of Thermotec pipe insulation.
Thermotec pipe insulation can be used on any piping system whether it is Copper, Plastic, Rheau, Fusiotherm and Aquatherm.
Thermotec 4-Zero Pipe Insulation in the most widely specified pipe insulation for commercial projects in Australia
Thermotec's Polytube, Sealed Tube, Quickseal, 4-Zero &Thermalag Thermal Pipe Insulation is non ozone depleting and can be used in accordance with greenstar requirements such as EMI9.
Thermotec Polytube
Thin walled green coloured pipe insulation for domestic applications and dead legs on recirculating hot water systems. Also can be used in rough ins on copper and plastic piping systems.
Dimensions: 6mm wall thickness product covers 12mm, 15mm and 20mm pipe
Thermotec Sealed Tube
Economic alternative to Quick Seal grade, particularly suitable where pipework is insulated prior to installation.
Dimensions: 10mm, 15mm & 20mm wall thicknesses product covers 12mm to 100mm pipe
Thermotec Quick Seal
Preformed flame retarded pipe insulation, incorporating unique press seal fastener for quick and easy application on installed pipework.
Dimensions: 10mm, 15mm & 20mm wall thicknesses product covers 12mm to 100mm pipe
Thermotec 4-Zero
Incorporating a factory applied reinforced aluminium covering for optimum fire performance in accordance with AS 1530.3
Dimensions: 15mm, 20mm, 25mm & 30mm wall thicknesses product covers 12mm to 100mm pipe
Thermotec F.P.I. (Fibreglass Pipe Insulation)
High density fibre glass incorporating a factory applied reinforced aluminium covering for optimum fire protection in accordance with AS 1530.3 Thermotec's F.P.I. pipe insulation is recommended on steam and solar hot water pipes, as the pipes can reach excessive temperatures. operating temperature for Thermotec F.P.I. pipe insulation ranges from -10 deg to +480 deg.
Dimensions: 25mm, 38mm & 50mm wall thicknesses product covers 12mm to 200mm pipe
Thermotec Thermalag
Foam sheet cut to predetermined width to exactly fit large diameter pipe. Grooved on inside to eliminate tension and facilitate quick and easy application. Available with AS/NZS 1530.3 fire performance or alternatively with our standard foam finish.
Dimensions: 10mm, 15mm, 20mm & 25mm wall thicknesses product covers pipe work above 100mm internal diameter pipe
To contact Thermotec Australia Pty Ltd about Pipe Insulation use Get a quote.
Fire performance, noise attenuation, chemical resistance, size, wall thickness availability and cost are factors which will usually lead to the selection of a specific grade of Thermotec pipe insulation.
Thermotec pipe insulation can be used on any piping system whether it is Copper, Plastic, Rheau, Fusiotherm and Aquatherm.
Thermotec 4-Zero Pipe Insulation in the most widely specified pipe insulation for commercial projects in Australia
Thermotec's Polytube, Sealed Tube, Quickseal, 4-Zero &Thermalag Thermal Pipe Insulation is non ozone depleting and can be used in accordance with greenstar requirements such as EMI9.
Thermotec Polytube
Thin walled green coloured pipe insulation for domestic applications and dead legs on recirculating hot water systems. Also can be used in rough ins on copper and plastic piping systems.
Dimensions: 6mm wall thickness product covers 12mm, 15mm and 20mm pipe
Thermotec Sealed Tube
Economic alternative to Quick Seal grade, particularly suitable where pipework is insulated prior to installation.
Dimensions: 10mm, 15mm & 20mm wall thicknesses product covers 12mm to 100mm pipe
Thermotec Quick Seal
Preformed flame retarded pipe insulation, incorporating unique press seal fastener for quick and easy application on installed pipework.
Dimensions: 10mm, 15mm & 20mm wall thicknesses product covers 12mm to 100mm pipe
Thermotec 4-Zero
Incorporating a factory applied reinforced aluminium covering for optimum fire performance in accordance with AS 1530.3
Dimensions: 15mm, 20mm, 25mm & 30mm wall thicknesses product covers 12mm to 100mm pipe
Thermotec F.P.I. (Fibreglass Pipe Insulation)
High density fibre glass incorporating a factory applied reinforced aluminium covering for optimum fire protection in accordance with AS 1530.3 Thermotec's F.P.I. pipe insulation is recommended on steam and solar hot water pipes, as the pipes can reach excessive temperatures. operating temperature for Thermotec F.P.I. pipe insulation ranges from -10 deg to +480 deg.
Dimensions: 25mm, 38mm & 50mm wall thicknesses product covers 12mm to 200mm pipe
Thermotec Thermalag
Foam sheet cut to predetermined width to exactly fit large diameter pipe. Grooved on inside to eliminate tension and facilitate quick and easy application. Available with AS/NZS 1530.3 fire performance or alternatively with our standard foam finish.
Dimensions: 10mm, 15mm, 20mm & 25mm wall thicknesses product covers pipe work above 100mm internal diameter pipe
More Information on Pipe Insulation >>
To contact Thermotec Australia Pty Ltd about Pipe Insulation use Get a quote.
Thermotec pipe insulation insulates pipework made from copper, plastic, Rheau, Fusiotherm and Aquatherm; cost, fire performance, noise attenuation, chemical resistance, pipe size and wall thickness usually guide selection of a specific grade. Quickseal’s press-seal fastener allows quick application to pipework already installed. Thermotec recommends F.P.I. for steam and solar hot-water pipes, which can reach excessive operating temperatures.
- Polytube, Sealed Tube, Quickseal, 4-Zero and Thermalag are non-ozone-depleting
- 4-Zero: reinforced aluminium covering; fire performance in accordance with AS 1530.3
- F.P.I. operating range: -10 to +480 degrees
- Sealed Tube and Quickseal cover pipe sizes from 12mm to 100mm
- Thermalag covers pipework above 100mm internal diameter
Source: listing by Thermotec Australia Pty Ltd on IndustrySearch · Updated 31 Oct 2026
AI Overview is generated by artificial intelligence and may contain mistakes.
Written by AI from the listing by Thermotec Australia Pty Ltd on IndustrySearch. It is meant to use only what that listing says, but it can still get details wrong, so check them with the supplier before you buy.
Thanks for your feedback.
Pipe Insulation | FR Armaflex
Pipe Insulation | FR Armaflex Selfseal
Insulation Materials | Armaflex Solar | Armaflex DuoSolar
Insulation Materials | NH Armaflex
Insulation Materials | HT Armaflex
Insulation Materials | AR Accoflex
Pipe Insulation | Armafix
Armaflex Pipe Insulation | Cryogenic Systems
Glass Fibre Sectional Pipe Insulation (SPI)
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales