Press Brake Clamping System | Wilson Tool ...

Press Brake Clamping System | Wilson Tool Express Air

Supplier: Sheetmetal Tooling Tech

1/2

For faster setups and changeovers, add the Express Air pneumatic clamping system to your press brake and watch your productivity soar.

Video for Press Brake Clamping System | Wilson Tool Express Air

120 Recent Views In Stock

Maximize Your Press Brake Flexibility
The Express Air Clamping System offers fast, flexible setups using a clean, low-cost power source. Designed for European style press brake tooling, Express Air is a pneumatic punch holder that uses standard shop air (90-120 Psi) to clamp and seat tooling in seconds with the touch of a button or the flip of a switch. There is no need for an additional pump or power source.

With a unique interlocking wedge design Express Air sectionalized punch holders can be pushed together to create a solid beam or gapped for box bending. They also boast the narrowest body on the market to enable the greatest range of bend angles — up to 30°with longer flanges in the front and back than similar holders.

Smaller Investment. Big Impact.
Additionally, if you have an older press brake that has a scratched, dinged or uneven bending surface, adding a clamping solution like the Express Air™ system will breathe new life into your machine. Not only will you get a smooth, harder work surface, you’ll boost productivity with a variety of timesaving features at a significantly lower cost than regrinding or replacing the beam.

Easy Installation
The clamping system is also fast and easy to install for minimal machine downtime. Additionally, the clamps are interchangeable with most OEM holders for a gradual transition to air power using several holders or all at once with holders for the entire length of the beam.

Data below is metric only

Tool Style	European
Seating	Beveled tangs self seat
Shortest Piece to Clamp	10mm
Hardness	70 HRC
Tool Shoulder Load (Symmetric)	104 tons/m
Tool Weight Limit to Clamp & Seat	288 kg
CLAMPING INFORMATION
Method to Secure to the Press Brake	American, Z1, Z2
Power, Method, Actuation	Pneumatic, piston, wireless or handle
Beam Construction	Modular
Working Height	American and Z1 = 100mm; Z2 = 120mm
Operating Pressure	6.2-8.3 Bar
Clears 30° Acute Front and Back	Front and Back

This Product is available for distribution in Australia only

If you are not sure what you need, give us a call and quote IndustrySearch to discuss your needs.

To contact Sheetmetal Tooling Tech about Press Brake Clamping System | Wilson Tool Express Air use Get a quote.

Data below is metric only

Tool Style	European
Seating	Beveled tangs self seat
Shortest Piece to Clamp	10mm
Hardness	70 HRC
Tool Shoulder Load (Symmetric)	104 tons/m
Tool Weight Limit to Clamp & Seat	288 kg
CLAMPING INFORMATION
Method to Secure to the Press Brake	American, Z1, Z2
Power, Method, Actuation	Pneumatic, piston, wireless or handle
Beam Construction	Modular
Working Height	American and Z1 = 100mm; Z2 = 120mm
Operating Pressure	6.2-8.3 Bar
Clears 30° Acute Front and Back	Front and Back

This Product is available for distribution in Australia only

If you are not sure what you need, give us a call and quote IndustrySearch to discuss your needs.

Read less...

To contact Sheetmetal Tooling Tech about Press Brake Clamping System | Wilson Tool Express Air use Get a quote.

AI Overview BETA

Wilson Tool Express Air is a pneumatic press brake clamping system and punch holder for European-style tooling. It uses standard shop air at 90–120 Psi to clamp and seat tooling in seconds by button or switch. For older press brakes with uneven bending surfaces, it adds a smooth, harder work surface at significantly lower cost than regrinding or replacing the beam.

Wedge design joins holders into a beam or leaves gaps for box bending
Clears up to 30° acute bends at both front and back
104 tons/m symmetric tool shoulder load
288 kg tool weight limit for clamping and seating
70 HRC tool hardness

Source: listing by Sheetmetal Tooling Tech on IndustrySearch · Updated 4 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Sheetmetal Tooling Tech provide you with a quote

Supplier

Supplier: Sheetmetal Tooling Tech

Distribution: Australia Wide

Location: NSW

Customers: Steel Door Frames, Locker Group, Action Sheetmetal

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Sheetmetal Tooling Tech are also proudly displaying these credentials:

Established:

2003

Employees:

1-5

Customers:

Steel Door Frames, Locker Group, Action Sheetmetal

Memberships:

AMTIL, SIA

Distribution:

Australia Wide

Location:

, NSW