Ultrasonic Level Switch | Non Invasive - Pulsarpoint 600 Series

Ultrasonic Level Switch | Non Invasive - Pulsarpoint 600 Series

They provide easy to install reliable and non intrusive point level indication. The Ultrasonic Level Switch | Non Invasive - Pulsarpoint 600 Series is used on metal tanks containing liquids and slurries to provide indication of rising or falling liquid levels.

Application

The Ultrasonic Level Switch | Non Invasive - Pulsarpoint 600 Series is attached to the outer wall of the tank at a point coinciding with the level at which indication is required.

Ultrasonic soundwaves are transmitted through the side wall of the tank to detect the absence or presence of the liquid, by monitoring the characteristics of the reflected soundwaves.

A change in condition is indicated once material reaches the required level. The output may be assigned to indicate a 'wet' or dry' condition at the required level.

Features of Ultrasonic Level Switch | Non Invasive - Pulsarpoint 600 Series

• Non-invasive point level detection
• Relay version (600)
• Two wire loop powered version (610)
• Intrinsically safe version (611)
• Microprocessor controlled
• Auto calibrate 'wet' or 'dry'
• Alarm 'wet' or 'dry'
• Single button setup
• Repeatability ±1 mm
• Unique installation self-check routine.

Ultrasonic Level Switch | Non Invasive - Pulsarpoint 600 Series Brochure (.pdf) >>

Read more...

To contact Bintech about Ultrasonic Level Switch | Non Invasive - Pulsarpoint 600 Series use Get A Quote.

They provide easy to install reliable and non intrusive point level indication. The Ultrasonic Level Switch | Non Invasive - Pulsarpoint 600 Series is used on metal tanks containing liquids and slurries to provide indication of rising or falling liquid levels.

Application

The Ultrasonic Level Switch | Non Invasive - Pulsarpoint 600 Series is attached to the outer wall of the tank at a point coinciding with the level at which indication is required.

Ultrasonic soundwaves are transmitted through the side wall of the tank to detect the absence or presence of the liquid, by monitoring the characteristics of the reflected soundwaves.

A change in condition is indicated once material reaches the required level. The output may be assigned to indicate a 'wet' or dry' condition at the required level.

Features of Ultrasonic Level Switch | Non Invasive - Pulsarpoint 600 Series

• Non-invasive point level detection
• Relay version (600)
• Two wire loop powered version (610)
• Intrinsically safe version (611)
• Microprocessor controlled
• Auto calibrate 'wet' or 'dry'
• Alarm 'wet' or 'dry'
• Single button setup
• Repeatability ±1 mm
• Unique installation self-check routine.

Ultrasonic Level Switch | Non Invasive - Pulsarpoint 600 Series Brochure (.pdf) >>

Read less...

To contact Bintech about Ultrasonic Level Switch | Non Invasive - Pulsarpoint 600 Series use Get A Quote.