Vibratory Screens | Stainless Slurry Screen

Vibrating screens are used to separate material of varying sizes.

Common uses include:

• Sizing of particles on single or multiple deck systems.
• Removing fine powders in the de-dusting process.
• Separating large pieces on scalping screens.
• Washing or wet screening or even de-liquefying on a de-watering screen.
• Cleaning castings on foundry shake-outs or degrading sand lumps into grain size on shaker lump breakers or attrition mills.

Construction materials for screens include mild steel, 304 or 316 stainless steel. Mild steel troughs can be painted in process specific painting systems. Stainless steel troughs can be finished as per requirements.

For a case study in the mining industry, The Stainless Slurry Screen unit offered was designed to process 1.5tph of slurry and fit standardised Screenex type panels. A frame mounted pump hopper was integrated into the design to remove undersize screened slurry.

Overhead motors were installed for unit stability and ease of access. The central motor mount tube can be adjusted 5 degrees in order to orient the vibration more vertically if it is required.

Oscillating mounts were used to make the whole frame and screen one single piece of equipment for transport purposes.

To contact Vibroflow about Vibratory Screens | Stainless Slurry Screen use Get a quote.

Vibrating screens are used to separate material of varying sizes.

Common uses include:

• Sizing of particles on single or multiple deck systems.
• Removing fine powders in the de-dusting process.
• Separating large pieces on scalping screens.
• Washing or wet screening or even de-liquefying on a de-watering screen.
• Cleaning castings on foundry shake-outs or degrading sand lumps into grain size on shaker lump breakers or attrition mills.

Construction materials for screens include mild steel, 304 or 316 stainless steel. Mild steel troughs can be painted in process specific painting systems. Stainless steel troughs can be finished as per requirements.

For a case study in the mining industry, The Stainless Slurry Screen unit offered was designed to process 1.5tph of slurry and fit standardised Screenex type panels. A frame mounted pump hopper was integrated into the design to remove undersize screened slurry.

Overhead motors were installed for unit stability and ease of access. The central motor mount tube can be adjusted 5 degrees in order to orient the vibration more vertically if it is required.

Oscillating mounts were used to make the whole frame and screen one single piece of equipment for transport purposes.

Read less...

To contact Vibroflow about Vibratory Screens | Stainless Slurry Screen use Get a quote.