With over three decades of proven reliability throughout Australasia and an extensive operating range, Hitachi Electric Chain Hoists are suited to most applications. The Hitachi models vary from 250kg to 15 tonne capacity and are available in three or single phase, two speed or single speed while being tested to the Australian standards.

PRODUCT FEATURES

All Hitachi models are manufactured to comply with AS1418.2.
Operation: fully contactorised with high rated contactors and pendant controls; both fitted with mechanical interlocks and 24 Volt control. Optional IP65 pendant including E-Stop available.
Safety Limits: full current and shunt limit switches operate in both directions of hook travel.
Overload Limiter: this electro-mechanical device is exclusive to the Hitachi range and boasts a far more superior overload protection device than the slipping clutch method. Available on all Hitachi models.
Braking: all models are fitted with an electro-magnetic, self-adjusting disc type brake to the gearbox and the 'F' models have an additional auxiliary centrifugal brake fitted to the motor.
Completely enclosed design. Entire mechanism including; the motor, dual brake system, gears, rotating parts and electrical system can be operated under severe conditions.
Chain Bucket: noiseless design with flexible mounting.
High quality Grade 80 zinc or nickel plated load chain supplied as standard.
IP54 protection rating on all electric hoists and trolleys.
Motor thermal protection on all Hitachi models.
Optional radio remote control.
Ambient temperature requirement of -10 to 40 degrees.
Class M4 inclusive of 180 starts per hour.
Reverse phase protection relay on all models excluding; 250kg, 500kg and all single phase models.
Special low headroom hoist and trolley arrangements available to suit tight headroom applications.
Electric trolleys are fitted with Guide Rollers as standard to reduce wear and ensure suitability for curved beam applications.

Specifications: THREE PHASE / SINGLE SPEED HOISTS 415 volt, 50Hz

Model	¼S	½S	1S	2S	1F	2F	3F	5F
Stock Code	HEH010	HEH050	HEH100	HEH200	HEH110	HEH210	HEH300	HEH500
Rated Capacity (kg)	250	500	1000	2000	1000	2000	3000	5000
Speed (m/min)	10	7.2	4.6	2.3	7.1	6.8	4.1	2.8
Motor (kW)	0.45	0.63	0.8	0.8	1.3	2.4	2.4	2.4
Weight (kg)	28	31	37	49	42	80	99	121
Headroom (mm)	450	450	530	645	535	660	820	1020

Specifications: THREE PHASE / TWO SPEED HOISTS 415 volt, 50Hz

Model	¼SN	½SN	1SN	2SN	2FN	3FN	5FN
Stock Code	HEH020	HEH060	HEH120	HEH220	HEH230	HEH330	HEH530
Rated Capacity (kg)	250	500	1000	2000	2000	3000	5000
Speed (m/min)	7.2 / 1.8	7.2 / 1.8	4.6 / 1.2	2.3 / 0.6	6.8 / 1.7	4.0 / 1.0	2.8 / 0.7
Motor (kW)	0.32 / 0.08	0.63 / 0.16	0.8 / 0.2	0.8 / 0.2	2.4 / 0.6	2.4 / 0.6	2.4 / 0.6
Weight (kg)	33	36	42	54	96	112	146
Headroom (mm)	450	450	530	645	660	820	1020

Specifications: SINGLE PHASE / SINGLE SPEED HOISTS 240 volt, 50Hz

Model	¼S1	½S1	1S1	2S1
Stock Code	HEH900	HEH907	HEH911	HEH920
Rated Capacity (kg)	250	500	1000	2000
Speed (m/min)	5	3.6	2.3	1.1
Motor (kW)	0.25	0.32	0.4	0.4
Weight (kg)	34	34	39	51
Headroom (mm)	450	450	530	645

Specifications: THREE PHASE / ELECTRIC TROLLEYS 415 volt, 50Hz

*larger girder widths are available upon request.

Model	1ET	2ET	3ET	5ET
Stock Code	HET100	HET200	HET300	HET500
Rated Capacity (kg)	1000	2000	3000	5000
ET Speed (m/min)	Single Speed	Single Speed	ET 10.5 or 21.0	ET 10.5 or 21.0
ETN Speed (m/min)	Two Speed	Two Speed	ETN 21.0 / 5.3	ETN 21.0 / 5.3
Motor (kW)	0.14	0.14	0.3	0.3
Weight (kg)	38	52	60	86
Min. Radius (m)	1.5	1.8	2.0	3.0
Girder Width (mm) *	75 – 125	100 - 150	100 - 150	125 - 175

Pacific Hoists | Lifting and rigging equipment

Pacific Hoists is a privately owned materials handling Australian family business founded in 1976. Today, the company enjoys an enviable market leading position in both the Australian and New Zealand ... read more

Contact supplier for specifications

For more information about this item use the form below.

QUICK RESPONSE FORM