Tank Level Gauge | Non Invasive - VesselCheck is used by most of the leading beverage, pharmaceutical and chemical companies around the world for accurate, reliable, simple and safe tank contents gauging. This configuration has been developed for level measurement on small tanks.
Principle of Operation
A small ultrasonic sensor is clamped or bonded to the outside base of the vessel. The system calculates the height of the liquid in the tank from the time taken for the signal to be transmitted and then received from the liquid surface. Signals from the transducer are fed into the processor and then output to a separate system. The package is supplied as a sensor / processor pair.
Features of Tank Level Gauge | Non Invasive - VesselCheck ST1
Ultrasound technology proven for over twenty years
Truly non-invasive sensing technique
Sensors bonded to outside of tank base
Fits tanks of most shapes and sizes
Output to telemetry system - various options
ATEX approved for hazardous areas where required
Benefits of Tank Level Gauge | Non Invasive - VesselCheck ST1
Low cost, reliable & accurate tank gauging
Not affected by pressure & temperature fluctuations
Bintech | Level & Flow Instruments, Pressure & Temperature Gauges
Bintech represents 12 international companies. It is dedicated to supplying quality innovative systems using its vast array of manufactured and imported products, most importantly, personal service to its customers.
Bintech was formed by Michael Bindon in 1993 with only one agency and now has over 12 companies at our dispense to combines technical backup with the ability to adapt products to a client’s specific needs. It is recognised as a preferred supplier for level control products to the oil, gas, LPG and diesel industries.
Bintech offers level measurement devices from 7 different suppliers and 5 different technologies. This enables us to provide the best possible solution to a client’s measurement application or problem.
Bintech has designed and manufactured 2 different systems which have gone on to sell in the thousands.
On-site commissioning and telephone assistance as well as workshop repair, servicing and calibration of our instrumentation can be provided.
The provision of technical support and advice to customers, custom built products as well as problem
solving are important features of Bintech’s business.
Bintech prides itself on its personalised service and attention to detail along with a working knowledge of
each client and their particular requirements.