Online Coal Ash and Moisture Analyser | ...

Online Coal Ash and Moisture Analyser | COALSCAN 2800

Coal Analysers - COALSCAN 2800

The COALSCAN Model 2800 Online Coal Ash and Moisture Analyser is a single enclosure designed to be installed directly on production conveyor belts.

277 Recent Views In Stock

The COALSCAN uses a dual gamma ray beam which passes through the entire bed of coal. One gamma ray measures the total ash content, the other compensates for changes in bed depth. Microwave technology measures the moisture content.

The standard COALSCAN can be customised to suit plant requirements. Options include:

Stainless steel electronics cabinet
SuperSCAN display and reporting system
Customised plant interfaces
Customised frames for wider belts and higher tonnage applications

COALSCAN Model 2800 Applications

Real time coal quality data provides active process control, with timely information on ash and moisture, to make decisions that maximise the value of the resource, optimise product quality and minimise operating costs.

Typical applications include:

Analysis of raw coal after crushing
Analysis of product coal between washery and stockpile or load-out bins
Analysis and blending control of coal during reclaim from stockpile, to ensure quality targets are met
Analysis of coal on delivery to power stations and steel plants, to monitor contract compliance and optimise coal use
Blending coals to take advantage of lower-cost, lower-quality coal whilst meeting specifications
Analysis of coal at power stations to optimise boiler-feed quality

COALSCAN Model 2800 Online Coal Ash and Moisture Analyser Advantages

State-of-the-art technology
Low investment and maintenance costs
Simple installation
Suits most belt sizes and loads
Does not touch the coal or the conveyor belt
Simple calibration
No sampling necessary during normal operation
Standard plant interfaces, including RS422 and Ethernet
IP65 (NEMA4) protection to suit typical plant conditions
Optional customised software output using SuperSCAN
Local technical support
Remote modem support

For your peace of mind we can offer you Free Testwork on your Samples to asses the suitability of the technology to each application. This removes any concern over buying a system where performance for your application would otherwise be uncertain.

We provide money back performance guarantees on our analysers.

To find out more about the COALSCAN 2800 Online Coal Ash and Moisture Analyser please call or use the IndustrySearch email form for a direct reply.

To contact Scantech International about Online Coal Ash and Moisture Analyser | COALSCAN 2800 use Get a quote.

The standard COALSCAN can be customised to suit plant requirements. Options include:

Stainless steel electronics cabinet
SuperSCAN display and reporting system
Customised plant interfaces
Customised frames for wider belts and higher tonnage applications

COALSCAN Model 2800 Applications

Typical applications include:

Analysis of raw coal after crushing
Analysis of product coal between washery and stockpile or load-out bins
Analysis and blending control of coal during reclaim from stockpile, to ensure quality targets are met
Analysis of coal on delivery to power stations and steel plants, to monitor contract compliance and optimise coal use
Blending coals to take advantage of lower-cost, lower-quality coal whilst meeting specifications
Analysis of coal at power stations to optimise boiler-feed quality

COALSCAN Model 2800 Online Coal Ash and Moisture Analyser Advantages

State-of-the-art technology
Low investment and maintenance costs
Simple installation
Suits most belt sizes and loads
Does not touch the coal or the conveyor belt
Simple calibration
No sampling necessary during normal operation
Standard plant interfaces, including RS422 and Ethernet
IP65 (NEMA4) protection to suit typical plant conditions
Optional customised software output using SuperSCAN
Local technical support
Remote modem support

We provide money back performance guarantees on our analysers.

To find out more about the COALSCAN 2800 Online Coal Ash and Moisture Analyser please call or use the IndustrySearch email form for a direct reply.

Read less...

To contact Scantech International about Online Coal Ash and Moisture Analyser | COALSCAN 2800 use Get a quote.

AI Overview BETA

The COALSCAN 2800 is an online coal analyser installed directly on a production conveyor belt to measure ash and moisture. Its dual gamma-ray beams measure total ash across the coal bed, with one beam compensating for changes in bed depth. Washery and power-station operators can use real-time quality data to control coal blending or optimise boiler-feed quality.

Microwave technology measures moisture content
Optional SuperSCAN display and reporting system
Custom frames available for wider belts and higher-tonnage applications
Standard plant interfaces include RS422 and Ethernet
No sampling is needed during normal operation

Source: listing by Scantech International on IndustrySearch · Updated 1 Nov 2026

AI Overview is generated by artificial intelligence and may contain mistakes.

Let Scantech International provide you with a quote

Supplier

Supplier: Scantech International

Distribution: Australia, New Zealand & Worldwide

Location: Underwood, QLD

Customers: 1000+ Systems Installed Worldwide

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Scantech International are also proudly displaying these credentials:

Established:

1981

Employees:

21-50

Customers:

1000+ Systems Installed Worldwide

Memberships:

Austmine

Certifications:

ISO 9001:2008 BV Certified

Distribution:

Australia, New Zealand & Worldwide